Видео

i just found this series, looking forward to seeing it finished!!

$90 for a 3d file for a box? And 5kg of filament? Passsssssssss. Would cost 10x less, be 10x faster to make and be more ridged to make it out of a few 2x4s, or extrusion, with some readily available acrylic panel mounts.

Scaled a spool holder to fit solder spools 😁😁😁

Can you use the rabbit with a sonic pad?

Please do do the video on tools!

I just did the math and I also have over 1,200 hours on my first Ender 3 S1 😆

Used this trick literally today. Found some simple S hooks I could use, and found that it was a little too thick/tall for my liking, so I scaled that down a bit, and then found that I needed smaller hooks for the smaller bars I had, so I scaled the whole thing down by 50% and boom, perfection.

Thank you for the awesome list of hardware, having it all in once place was a great touch! Cheers!

This video is a game changer for me. Thank you.

Having learned mold making, wood carving, wax model/lost wax and many other old methods of reproduction in art school I fail to see how fiddling with buttons and pictures for the same amount or more hours than it would take me is of any benefit. I already fix or make just about everything with molds, plastic welding, carving etc. and I get faster every time I do it. I can appreciate you trying to attract new enthusiasts to a new industry but observing the complexity as opposed to results this all seems like a very long walk to get to a place that literally vanishes if the electricity fails. Good luck with all of that.

Tks, captain obvious.

When do you think graphene will be considered or available for public use ?

Fun but the tolerance between parts also gets scaled lol!

This is one of the most useful videos I've seen and now I'm just waiting for my new computer to be ready so I can install Orca and start trying these suggestions through. Thanks Jonathan!

Or use old spools for this specific case?

How do you like the revo panda I installed it and it is working great do you mind telling me how overhangs are and I see you have a modded cooling duct is that stl available I bought the biqu duct but I think I can do better

Bambu Labs

Moral: Dont be a snowflake, bad night? Booho! dont complain, that's trump and republikkkans job, get up and hit harder. VOTE BLUE, VOTE BIDEN your life, the life of your kids depends on it.

Great details

By the way degem “דגם״ means model in hebrew

I was shocked by the A1 Mini as an X1 Carbon owner. It's been so great.

That Sunlu S4 is the stuff! I really like it. Hopefully I can figure out how to put Filamentalist auto rewinders in it.

I gotta apologize, a few videos I had said I hadn't heard you be critical of products, especially provided products. It's clear my memory and perception was wrong. Of course it would be impossible for anyone to prove there is no influence because of free products and relationships, but I definitely underestimated the number of times you fairly criticized products. On a separate note, I am really interested in the slunaz ff1r filament joiner. It looks like besides making sure you can use remainders of filament, you can produce some really cool aesthetic effects. And the video coverage of that device is very limited.

Ok, this is more like a normal person talks than other vids you made overall.

I’m not a fan of having my printer connected to the internet

Definitely interesting thoughts on these printers; can't say I'm surprised by many of them, but it's nice to have the summary either way

A problem I'm having with my Bambu P1S. Let's take a cube for instance. Now lets put a couple holes in it that do not go all the way through. They are not directly on top of each other but are slightly offset and separated by a 1mm wall. When I try to slice it I get a warning that there are floating areas and if I try to print it, it doesn't stick to the plate. If I enable supports it changes the object. It gets all kinds of stryations and puts supports underneath the object. What am I doing wrong and how do I correct this? I can send pics if neeced.

Great Job mate! love the mindset!

How can any 3d printer forget this? Its by far the easiest solution to most problems. Id say 90% of my printing gets scaled to some extent.

That same 3d printer is now $150 depending on your shipping fees. I just bought one myself

Thank you for the real life use update! I appreciate that you included print hour, it very much helped to confirm what I heard you say😂😂

This trick can be very useful, but always remember that any tolerance gap will scale accordingly, so mechanisms and fittings can become sloppier.

it literally does 12 minute benchys idk what you're on about with this x1 carbon stuff

that tel-aviv humidity!

It is three months since the last item about affordable filament recycling which interested me highly. Has this idea died a horrible death? I did have my reservations on the construction of the frame, but by now I presumed you would have found a capable mechanical engineer.

I made the fractal vice design, it needs work, and has a large amount of hardware

I have 5100 hours on my X1C...80% of the issues I've had are either caused by or actually the AMS. I'm getting good at predicting the things that will cause it issues.

I knew Quidi was bad

We have 3 X1-Carbon 3D printers. WONDERFUL! We want a 14" X 14" X 18" version or a 16" X 16" X 24" version. $5,000 and not even blink.

I love my MK3S+ with MMU2s. About your comments about this printer. I also replaced the nozzle with an E3D Revo. Furthermore I run it with Octoprint. But main thing: slow? I have my MK3S+ running not so slow at all. My Revo has a 0.6mm nozzle most of the time. But also I just use the pre installed settings for filaments to eventually run the prints at 200% speed with no problems at all (sometimes increasing nozzle temperature). Slow? It can print twice as fast. And with a 0.6 nozzle instead of 0.4....... even faster

I really want to support SOVOL. Is there an official store in the Philippines? Sad to say, our country is NOTORIOUS for scam sellers. I've been wanting a SOVOL since last year but bought another 3d Printer due to accessibility, fairly happy about it, but I really really want a SOVOL. Thanks.

where can i find that reference sheet for gridfinity? with all the dimensions?

Your name is Jonathon I?

You can really feel the E in ERCF

Kids will destroy

There are not many vids about the ERCF 2 and I’m not convinced about the buffer system. Seems like a pain to insert new filament.